Charles Kline
Well-known member
Donor 7 years: 2018-2024
VAPS
- Joined
- Aug 15, 2018
- Messages
- 9,639
- Reaction score
- 9,162
- Location
- Golden, Colorado
- May 5, 2024
- #1
Picked up this cabinet a few days ago.
Story of how I got this:
An operator friend of mine had recently picked up a Final Fight conversion,
Something about the cabinet looked familiar, it looked like a Rock-Ola cab so I looked at the back and sure enough it was a G 203 - That model number means Jump Bug!
I asked him if he cared what cabinet it was in and if I swapped all the Final Fight stuff into another cabinet if I could have the Rock-Ola cab, he didn't care so I got to searching for an empty cabinet (because I had gotten rid of all cabinets that I wasn't going to restore someday)
I actually picked this cabinet back up that I had sold for cheap back in 2021
What cab is this?
Let’s play another round of What Cabinet Was This?! It’s kinda got a Konami vibe. The back vents remind me of a Konami GT cab I used to have.
forums.arcade-museum.com
I swapped all the final fight stuff over over and brought this one home.
Much better cab for Final Fight in my opinion. (I'll post pics of that when I get it completed. Just need to finish the control panel and the monitor bezel.)
It still had its power supply with is awesome as well as all the AC wiring but I am going to have to make a main board harness for it.
It looks like someone took a angle grinder with 20 grit sanding disc to the sides. I'm going to have to get that paint stripped off and see how much body work its going to need. I'll be doing white laminate.
Last edited:
OP
OP
Charles Kline
Well-known member
Donor 7 years: 2018-2024
VAPS
- Joined
- Aug 15, 2018
- Messages
- 9,639
- Reaction score
- 9,162
- Location
- Golden, Colorado
- May 5, 2024
- #2
I've already placed an order with TOG on the side art and CPO that he had in stock. I'll have to find a Marquee and a PCB.
Ill need the monitor brackets and the will have to build the plywood monitor frame. I'm hoping I can still get some repro parts from @flynn54321
alfonzotan
Well-known member
VAPS
- Joined
- May 21, 2010
- Messages
- 3,199
- Reaction score
- 3,275
- Location
- Marietta, Georgia
- May 6, 2024
- #3
Looks like an Eyes. Standard disclaimer on the side panels (which don't look half bad here):
EYES restoration (Covid lockdown project)
I picked up this cab in a Ft. Walton Beach, FL thrift shop in 1996 along with Kickman, both for a few dollars. The monitor wasn't working (I found out much later it probably only needed to have the H-hold pot adjusted, live and learn), and I didn't do anything with it for a long time, partly...
forums.arcade-museum.com
Phetishboy
Well-known member
VAPS
- Joined
- Dec 12, 2006
- Messages
- 45,066
- Reaction score
- 5,454
- Location
- Avon, Minnesota
- May 6, 2024
- #4
I've restored three of these so if you have any questions, let me know. Yeah and if you get a hold of Bradley, let me know that too. I really need to get some parts for a Warpwarp that I plan on building. But he disappears from the forums for years at a time, so I'm not sure if he's even around anymore.
CraftyMech
Well-known member
Donor 2013-2014
VAPS
- Joined
- Jan 2, 2013
- Messages
- 5,117
- Reaction score
- 5,478
- Location
- PARKER, Colorado
- May 6, 2024
- #5
Awesome, it will be a bit of a project will make an awesome cab
If you need photos or anything of the inside let me know, I have an original Eyes cabinet that I also use for BitKit testing. And if you were interested in a Eyes -> Jamma adapter, I think I still have a couple of the pcbs for making one.
alfonzotan
Well-known member
VAPS
- Joined
- May 21, 2010
- Messages
- 3,199
- Reaction score
- 3,275
- Location
- Marietta, Georgia
- May 6, 2024
- #6
Phetishboy said:
I've restored three of these so if you have any questions, let me know. Yeah and if you get a hold of Bradley, let me know that too. I really need to get some parts for a Warpwarp that I plan on building. But he disappears from the forums for years at a time, so I'm not sure if he's even around anymore.
View attachment 739904
If anybody is making repros of those coin door decals (or better yet has an original on a peel sheet), please let me know about it.
Phetishboy
Well-known member
VAPS
- Joined
- Dec 12, 2006
- Messages
- 45,066
- Reaction score
- 5,454
- Location
- Avon, Minnesota
- May 6, 2024
- #7
alfonzotan said:
If anybody is making repros of those coin door decals (or better yet has an original on a peel sheet), please let me know about it.
Well, of course Rich used to make them. I think he sent me a whole bunch of them at one time about a decade ago. I may have an extra, I'll look.
vintagegamer
Well-known member
VAPS
- Joined
- Sep 1, 2007
- Messages
- 18,494
- Reaction score
- 843
- Location
- Bear, Delaware
- May 6, 2024
- #8
Very very cool grab!! Nice to see the classics still being saved!
We have a Tetris in an original Qbert cab. I keep telling my wife I'll move Tetris into another cab, but it's her game, so I immediately get shut down LOL
OP
OP
Charles Kline
Well-known member
Donor 7 years: 2018-2024
VAPS
- Joined
- Aug 15, 2018
- Messages
- 9,639
- Reaction score
- 9,162
- Location
- Golden, Colorado
- May 6, 2024
- #9
alfonzotan said:
Looks like an Eyes. Standard disclaimer on the side panels (which don't look half bad here):
EYES restoration (Covid lockdown project)
I picked up this cab in a Ft. Walton Beach, FL thrift shop in 1996 along with Kickman, both for a few dollars. The monitor wasn't working (I found out much later it probably only needed to have the H-hold pot adjusted, live and learn), and I didn't do anything with it for a long time, partly...
forums.arcade-museum.com
My CP i had was from an EYEs, but no, the cabinet was a Jump Bug. (Did you read the text?)
alfonzotan
Well-known member
VAPS
- Joined
- May 21, 2010
- Messages
- 3,199
- Reaction score
- 3,275
- Location
- Marietta, Georgia
- May 6, 2024
- #10
Charles Kline said:
My CP i had was from an EYEs, but no, the cabinet was a Jump Bug. (Did you read the text?)
Ah okay, was basing it on the CP.
OP
OP
Charles Kline
Well-known member
Donor 7 years: 2018-2024
VAPS
- Joined
- Aug 15, 2018
- Messages
- 9,639
- Reaction score
- 9,162
- Location
- Golden, Colorado
- May 6, 2024
- #11
alfonzotan said:
Ah okay, was basing it on the CP.
And you missed the photo where it had a final fight hacked up control panel on it and how i said i had a rock-ola CP on hand and the photo of the back tag that shows the model number 203 which is Jump Bug.
DonPanetta
Well-known member
Donor 2021
- Joined
- Dec 8, 2011
- Messages
- 4,889
- Reaction score
- 3,297
- Location
- Florida
- May 6, 2024
- #12
That grand products 19 inch cab you have would have been a good candidate for Final Fight. Regardless, this is an excellent score. Nibbler is on my rock-ola grail list.
Aeolus7
Well-known member
Donor 2012
VAPS
- Joined
- Feb 12, 2012
- Messages
- 1,268
- Reaction score
- 193
- Location
- Spring Lake, Michigan
- May 6, 2024
- #13
Great find, congrats. Having the power supply is a big plus, I had to find one for my PB, which took some time.
White laminate FTW!
vintagegamer
Well-known member
VAPS
- Joined
- Sep 1, 2007
- Messages
- 18,494
- Reaction score
- 843
- Location
- Bear, Delaware
- May 6, 2024
- #14
How reliable are the Rock-Ola games?
OP
OP
Charles Kline
Well-known member
Donor 7 years: 2018-2024
VAPS
- Joined
- Aug 15, 2018
- Messages
- 9,639
- Reaction score
- 9,162
- Location
- Golden, Colorado
- May 6, 2024
- #15
DonPanetta said:
That grand products 19 inch cab you have would have been a good candidate for Final Fight. Regardless, this is an excellent score. Nibbler is on my rock-ola grail list.
That's crazy you say that, I just updated post #1 to included just that info! Much better cabinet for Final Fight.
DonPanetta
Well-known member
Donor 2021
- Joined
- Dec 8, 2011
- Messages
- 4,889
- Reaction score
- 3,297
- Location
- Florida
- May 6, 2024
- #16
Charles Kline said:
That's crazy you say that, I just updated post #1 to included just that info! Much better cabinet for Final Fight.
Ha! Ironically galloping ghost has their final fight in the same cabinet. I'm a huge proponent of having games in their original cabinet when it comes to iconic locations like gg but i did actually enjoy the look of final fight in that cabinet.
I actually had a clone cabinet (the ones bundled with the ultracade) fall on my lap when i asked you to trace the original out for me. It serves my purpose but in hindsight i would have preferred the original 19" monitor version.
I still think that design is ripe for a bare bones conversion cabinet today, Even if that meant having it strictly use an LCD. the design can easily be modified to use no metal parts, trays can easily be swapped and monitor orientation can be quickly modified etc.
OP
OP
Charles Kline
Well-known member
Donor 7 years: 2018-2024
VAPS
- Joined
- Aug 15, 2018
- Messages
- 9,639
- Reaction score
- 9,162
- Location
- Golden, Colorado
- May 7, 2024
- #17
Just got tracking info from TOG on the side art and CPO!
I was lucky he had one of each in stock.
Gremlin75
Well-known member
Donor 2020, 2023
VAPS
- Joined
- Oct 15, 2013
- Messages
- 421
- Reaction score
- 322
- Location
- Nampa, Idaho
- May 7, 2024
- #18
Phetishboy said:
Well, of course Rich used to make them. I think he sent me a whole bunch of them at one time about a decade ago. I may have an extra, I'll look.
If you do find them, I could use one for my Warp Warp.
OP
OP
Charles Kline
Well-known member
Donor 7 years: 2018-2024
VAPS
- Joined
- Aug 15, 2018
- Messages
- 9,639
- Reaction score
- 9,162
- Location
- Golden, Colorado
- May 7, 2024
- #19
I asked Rich if he still had any of the coin door labels left. I will report back.
PassivePac-Man
Well-known member
Donor 3 years: 2016-2018
VAPS
- Joined
- Nov 14, 2015
- Messages
- 3,833
- Reaction score
- 1,437
- Location
- Fargo, North Dakota
- May 7, 2024
- #20
Charles Kline said:
I asked Rich if he still had any of the coin door labels left. I will report back.
I asked him back in 2019 (2018?) when I got the art for my Jump Bug restoration and he was out of em then. I'd like one too if he or anyone else has one
Excited to see your restoration, man. It's such a fun game
Shameless Plug:
Rock-Ola Jump Bug Restoration
I have finally found a Rock-Ola cab that I’ll be making my Jump Bug. MTPPC here on Klov so graciously sold me a Warp Warp converted into Arkanoid 2. I’ll be tracking my restoration in this thread. The only pics I currently have(it’s still on its way) are here...
forums.arcade-museum.com
Last edited:
You must log in or register to reply here.