How to Prevent Cakes and Loaves from Sinking (2024)

How to Prevent Cakes and Loaves from Sinking

TIME

Be sure to bake for long enough! Instead of only relying on the baking time listed by the recipe, follow the sensory indicators written first and foremost. How long a loaf of banana bread or a yellow cake layer takes to bake in my kitchen, with my ingredients, in my oven, at my elevation, in my climate will likely be different than yours!

How to tell when a cake or loaf is done baking?

Use the sensory indicators given in the recipe and perform a toothpick or cake tester test. For most recipes, you want a small amount of moist crumbs or none at all. If your tester comes out with wetness or raw batter still clinging on, it’s not baked through and will likely sink.

The key to using a toothpick or cake tester is to insert into the center most point from the edges of the pan, probing directly into the middle. You don’t want it too deep that it’s touching the pan and not too shallow that it’s barely inserted.

If your cake or loaf has a very well developed exterior crust, that crust could actually scrape some of the crumbs off, giving you an inaccurate sense of doneness.

So what’s even better and more accurate than a cake tester or toothpick? An instant read thermometer! Quick breads like Banana Bread or Lemon Loaf are done when they reach an internal temperature of 200 to 205°F. Cakes are done when they reach an internal temperature of 205 to 210°F.

OVEN PROBLEMS

Accuracy

Some ovens run colder than others. If your oven isn’t up to temperature consistently during the baking time, you may experience sunken cakes or loaves. Use an oven thermometer to gauge the accuracy of your oven. At the very least, try waiting 10 minutes after the oven has beeped to signify it has preheated before actually baking anything. Most home ovens need more time to fully come to temperature. More on this in my Oven 101 article.

Opening & closing

If you open and close your oven door too many times during the baking process, you’ll lose the heat of the oven. Your product won’t be able to bake through completely. Only open your oven when testing for doneness when about to remove the product.

Slamming door

Slamming the oven door can collapse your cake or loaf. So can slamming down your pans after baking. Remove your cake or loaf from the oven carefully and gently place on the counter while cooling.

USING THE WRONG PAN

This tip applies to loaves specifically. For recipes like banana bread, lemon loaf, or pound cake, your best bet is to bake in a metal loaf pan. Metal is a quick and efficient conductor of heat. This helps to ensure your recipe will cook through the center and not collapse. Avoid using dark-colored pans as they brown way more quickly and aggressively.

Glass and ceramic are slower conductors of heat. In fact, I did an experiment baking a double batch of the same recipe of banana bread at the same time. The only difference? One loaf was baked in a metal pan and the other in a glass pan.

The glass loaf was on average 10°F cooler in the center than the banana bread baked in the metal loaf.

So if you use a glass pan, you’ll need to decrease your baking temperature to 325°F and increase your baking time by about 10 minutes. This will allow your loaves to bake through completely before the edges have dried out.

Lastly, it’s also important to use the same size pan as called for in the recipe. Using the wrong size pan can disrupt the product’s ability to rise and develop properly. This goes for width, height, and depth. Even an inch difference in diameter adds up. For example, an 8-inch cake pan holds 4 cups of batter and a 9-inch cake pan holds 5 cups of batter.

LEAVENING AGENT

There are three things that can cause your cakes or loaves to sink in relation to your leavening agent(s). These include baking soda and baking powder.

1. Expired: If your baking soda or powder is expired it will not leaven your loaf or cake, causing it to sink in the center. It can expire or lose its effectiveness even before the expiration date. Learn how to test your baking soda and powder for freshness here.
2. Too much: If you accidentally overmeasure your baking soda or powder it can also cause your cake or loaf to sink in the middle.
3. High altitude: If you’re baking at a higher altitude you’ll need less leavening to achieve the same result as sea level. Without proper altitude adjustments, your products may sink.

OVERBEATING

For layer cakes, the key is to incorporate enough air during the butter + sugar creaming process to achieve a light and fluffy cake. This can be a fine balance. Incorporate too little air, and your cake won’t rise much. Incorporate too much, and your cake will collapse because it simply can’t hold onto all that air.

You don’t want to beat gradually at medium to medium-high speed. Avoid the temptation of cranking your mixer to the highest speed because the air needs to be incorporated somewhat gradually. The key? Find your mixer’s perfect speed (each brand, model, and machine is unique) and beat for about 4 to 7 minutes.

If you beat too much once the wet and dry ingredients combine, this can add too much additional air or collapse the air bubbles inside the batter. This can also lead to more gluten development than intended for the recipe, yielding a rubbery texture.

For quick breads and loaves, you want to stir very lightly once the wet and dry ingredients are combined. You don’t want to activate the webs of gluten more than the recipe is equipped to handle.