FAQs
When it comes down to it, those coarse bits in your fudge are just the sugars that have crystallized instead of setting into a smooth consistency as the mixture was cooling down. Graining can be caused by stirring the fudge mixture during the cooling process or not adding enough fluid to dissolve the sugar.
How to stop fudge from being grainy? ›
Don't panic if your fudge is grainy, nothing is lost it just requires some more work. Pop the grainy fudge back into the pan along with some water and a little cream and melt the fudge back down to a liquid and re-boil it to temperature.
What is the secret to good fudge? ›
Valuable tips for successful fudge
- Don't stir during cooking. Fudge can be cooked on the stove or in the microwave. ...
- Avoid crystallization. During cooking, sugar crystals can stick to the sides of the pan. ...
- Let cool before beating. After being cooked, the sugar must crystallize again to create fudge. ...
- Beat the mixture.
How do you fix fudge that won't set? ›
Solutions to Save Your Fudge:
You can start by gently reheating it and boiling or cooking it again, aiming to reach the correct temperature. Alternatively, using short bursts in the microwave and stirring between intervals until it thickens can also be an effective method to restore its texture.
What makes fudge smooth? ›
For first-time candy makers: Look for recipes that call for corn syrup, marshmallows, or marshmallow crème. These ingredients prevent crystallization of sugar into large grains, so the texture of the fudge will remain smooth. Also, recipes using cream or condensed milk are less likely to curdle than regular milk.
What to do with failed fudge? ›
Options for what you can do with your unset fudge:
OPTION 1) Depending on how runny it is, you can either use it as a frosting for cakes, or a sauce for ice-cream. OPTION 2) Freeze it overnight. Cut it into squares. Cover each square thickly in melted chocolate, ensuring no part of the fudge is exposed.
Why is my 3 ingredient fudge not setting? ›
Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.
How to make fudge that isn't grainy? ›
Grainy Fudge
If the melting sugar splashes onto the sides of the pan, it turns back into crystals and causes the fudge to seize up. To avoid this issue, swirl the pan instead of stirring it with a spoon. You can use a wet pastry brush to wipe down any sugar that sticks to the sides of the pot.
What happens if I use sweetened condensed milk instead of evaporated milk in fudge? ›
Don't Substitute One for the Other
Thus, using condensed milk in a recipe that requires evaporated milk will yield an overly sweet dish.
Do you stir fudge when it's boiling? ›
Avoid Stirring Once the Mixture Comes to a Simmer
Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.
Too cooked
The result is hard and brittle fudge. To save the fudge, put it in a saucepan with 45 to 60 ml (3 or 4 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil without stirring until the thermometer reaches 114 to 115 °C (237 to 239 °F).
Can fudge be melted and reset? ›
In principle for traditional fudge you could re-heat it by adding more liquid so that the sugars dissolve. You would then need to evaporate the excess liquid (but don't exceed the soft-ball stage at 237 F/114 C) to recreate your supersaturated solution.
How do you keep fudge from crystallizing? ›
By letting the fudge cool without stirring, you avoid creating seed crystals.
How to stop fudge from going grainy? ›
If you discover that your mixture is grainy, some quick thinking will save the entire batch. Pour the fudge back into your pan, and add about a cup of water to it, along with a tablespoon or two of evaporated milk, whipping cream, or whatever cream you're using.
When to stop beating fudge? ›
Once the mixture has cooled enough, use a wooden spoon or an electric hand mixer to beat the fudge until you see the very first signs of the mixture shifting from glossy to matte. Believe yourself when you think you see them! If you over-mix the fudge it will set in your pot.
How long do you boil fudge to get to soft ball stage? ›
How long does it take to make fudge:
- about 18 min to reach boiling.
- about 40 minutes to reach soft ball stage.
- 60 minutes to cool.
- 28 minutes to beat in a KitchenAid (your time for this may vary)
- 4 hours to set.
Why does my fudge crumble when I cut it? ›
The ingredients for fudge are combined and cooked to 234 degrees, cooled to 110 degrees without stirring, then beaten until creamy. Candy that isn't cooked long enough will end up too soft; overcooking makes fudge crumbly or hard.
How do you keep homemade fudge soft? ›
Place the fudge in an airtight container and separate the layers with wax paper so the pieces don't stick. Avoid storing fudge long-term in cellophane bags or tins, which aren't airtight and can dry out the fudge. Just transfer the candy to your preferred container when you're ready to gift it.
Do you put fudge in the fridge to set? ›
Let the fudge rest at room temperature for 15 minutes before placing in the refrigerator, uncovered. Refrigerate until the fudge is firm, about 2-3 hours (or overnight), before slicing and serving.