Temperature For Fudge | Ask Nigella.com (2024)

FAQs

Temperature For Fudge | Ask Nigella.com? ›

Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F). The cooking is intended to evaporate a part of the liquid and concentrate the sugar.

Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F). The cooking is intended to evaporate a part of the liquid and concentrate the sugar.

Chewy fudge is often the result of undercooking. To fix it, you can reheat the fudge mixture over low heat and continue cooking until it reaches the proper temperature. Be sure to use a candy thermometer to monitor the temperature accurately.

Cook the mixture over medium-low heat, without stirring, until the thermometer registers 234 degrees, about 20 to 25 minutes. The mixture should boil at a moderate, steady rate over the entire surface. While the fudge is cooking, prepare the baking pan.

If the candy forms a soft pliable ball, it is in the softball stage, about 235°— 240°F. This is the stage you would cook to if you are making fudge. If the candy forms a firm but not hard ball, it is in the firm ball stage. The temperature of this stage is between 242—248°F.

The key to creamy, luscious fudge is controlling crystal formation. If the sucrose (table sugar) crystals are small, the fudge will feel creamy and smooth on your tongue. But if the crystals are large, the fudge develops a crumbly, dry, or even coarse texture.

Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.

Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture. As you beat the fudge, pay attention to color and texture. Once the fudge loses its sheen and thickens, put down your spoon.

How do you fix fudge that is too soft? Bring the fudge back to a boil with 1–2 US tbsp (15–30 ml) of cream. If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

High-quality fudge tastes smooth and creamy because it contains small sugar crystals. It has a deep brown color and a satiny sheen. Poor-quality fudge tastes grainy because it contains large sugar crystals.

How do you know when fudge is ready to set? ›

You know it's ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.

Grainy Fudge

If the melting sugar splashes onto the sides of the pan, it turns back into crystals and causes the fudge to seize up. To avoid this issue, swirl the pan instead of stirring it with a spoon. You can use a wet pastry brush to wipe down any sugar that sticks to the sides of the pot.

If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature. Don't throw out the whole pan, because you may be able to melt the fudge down and try again.

Secondly, the pot's material should allow for good heat distribution hence your top choice should be copper cookware or a pot with a copper core. Copper's exceptional heat conductivity offers unparalleled temperature control, an asset when working with finicky ingredients like sugar.