Secrets to Successful Fudge | RICARDO (2024)

For many, homemade fudge and the holidays go hand-in-hand. Even if each family has its own recipe, making fudge isn’t always easy. So we've put together a comprehensive guide for you with proven, science-based tips and tricks for successful fudge, every time!

Fudge basics

Ingredients

“Real” fudge is nothing more than white sugar, brown sugar and, you guessed it, cream. A bit of vanilla or maple extract for flavour, nuts if you desire, and you have that sweetest of sweet treats found in so many Canadian homes. Other ingredients can be added depending on the recipe you’re working with: icing sugar, maple syrup, corn syrup, evaporated milk, marshmallows. Ricardo even adds white chocolate.

Desired texture

What do you look for in a piece of fudge? It should hold together well without being too hard and, above all, has to be melty and silky in your mouth. It’s the size of sugar crystals that makes the knees of fudge lovers buckle…the smaller the crystals, the less they are perceived on the tongue and the more the fudge tastes smooth and creamy. Cooking, and beating after cooking, is the key to successful fudge.

Cooking

Cooking is necessary to dissolve sugar crystals and to evaporate part of the water in the cream. The length of this step has a direct impact on the firmness of the fudge. As water gradually evaporates, sugar is concentrated and the temperature of the mixture rises above 100°C (212°F). If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard. Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft. A temperature of 112°C to 114°C (234°F to 237°F) must be maintained. This will ensure the fudge has the ideal concentration of water and sugar.

Candy Thermometer

Fudge is difficult to make. Don’t rely on recipes that tell you to boil the fudge mixture for a specific amount of time. There are too many unknowns to set an exact time. Cooking time depends on the size of your pan—the bigger it is, the more evaporation will occur—plus the heat intensity or power level of your microwave. The best way to check if it’s done is to measure with a candy thermometer or do a cold water test.

Online store

Silicone Thermometer Spatula

Valuable tips for successful fudge

1. Don’t stir during cooking

Fudge can be cooked on the stove or in the microwave. The advantage of using a microwave is that the mixture will not stick to the bottom of the pan during cooking. In both cases, sugar and cream must be brought to a boil by gently stirring, then—and this is very important—refrain from stirring again throughout the rest of the cooking process. Sugar crystallization causes a chain reaction: If a crystal is present in the mixture, other sugar molecules will attach to it and the mixture may seize and become grainy.

2. Avoid crystallization

During cooking, sugar crystals can stick to the sides of the pan. If you stir the mixture, these crystals could fall in and crystallize a part of the sugar again. To work around this issue and dissolve all crystal traces, brush the sides of the pan with a brush dipped in water at the beginning of the cooking process.

3. Let cool before beating

After being cooked, the sugar must crystallize again to create fudge. This stage will determine the size of the sugar crystals. The sugar should ideally form small crystals that are barely discernible on the tongue. To achieve this, let the mixture cool for 15 minutes before beating it. It will thicken as it cools, so when you beat the mixture, sugar molecules will have a tough time clinging to one another (it’s like trying to swim in molasses!). The result: crystals that form will stay small. Experience has shown that you should beat the mixture when its temperature ranges from 43°C to 45°C (110°F to 113°F), which normally occurs 15 minutes after the pan is removed from heat. The fudge is warm, but not burning hot.

4. Beat the mixture

After letting the fudge cool, it’s time to beat it. It is important to stir constantly with a wooden spoon until the mixture starts to thicken and its surface starts to look dull or matte. Now is the time to stop beating and pour the fudge into a mould. Another tip: Do not scrape the sides of the pan or the spoon used for stirring. They are often covered with a grainier layer of fudge.

In Summary

  • • Use a heavy pan that distributes heat well or the mixture may stick during cooking. This advice does not apply if you are making fudge in the microwave.
  • • Brush the sides of the pan with a wet brush at the beginning of cooking to dissolve sugar crystals stuck to the sides.
  • • Never stir the mixture during cooking or sugar could crystallize again. The mixture may seize and become grainy.
  • • Use a candy thermometer or conduct a cold water test to check if the fudge is done. Do not rely on the cooking time indicated in your recipe. The fudge is ready when a candy thermometer reads between 112°C to 114°C (234°F to 237°F) or the mixture forms a soft ball in cold water.
  • • Let the mixture cool before beating. The temperature at this point should be 43°C to 45°C (110°F to 113°F). The fudge should be warm but not burning hot.
  • • Stop beating when the surface of the mixture starts to look dull or matte. Pour immediately into a mould that has been buttered or lined with parchment paper and let cool completely.

The cold water test

Even without a candy thermometer, you can still check if the fudge is cooked by doing a cold water test. Drop a piece of hot fudge into a glass filled with ice water. It should form a soft ball that can easily flatten between your fingers. Repeat this test every two minutes, each time using a clean spoon, until the fudge has the desired consistency.

Ready to make some fudge? Here are a few recipes to satisfy your sweet tooth:

Maple Fudge

Maple Syrup Fudge

The best

Maple Fudge (The Best)

ALLERGY-FRIENDLY

Dairy-Free and Nut-Free Sugar Fudge

GOURMET GIFTS

Creamy Fudge with Peanuts

Secrets to Successful Fudge | RICARDO (2024)

FAQs

Secrets to Successful Fudge | RICARDO? ›

We'll say it again: resist stirring.

Fudge is a lesson in chemistry—and also a lesson in patience and restraint. After the mixture raches the soft-ball stage, you want to let the fudge cool to about 115° without stirring. Potential grainy moment: If you stir your fudge before it cools to 115 ° F crystals can form.

What is the secret to perfect fudge? ›

We'll say it again: resist stirring.

Fudge is a lesson in chemistry—and also a lesson in patience and restraint. After the mixture raches the soft-ball stage, you want to let the fudge cool to about 115° without stirring. Potential grainy moment: If you stir your fudge before it cools to 115 ° F crystals can form.

What is the key to successful non grainy fudge? ›

The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

What happens if I use sweetened condensed milk instead of evaporated milk in fudge? ›

Don't Substitute One for the Other

Thus, using condensed milk in a recipe that requires evaporated milk will yield an overly sweet dish.

Why is my 3 ingredient fudge not setting? ›

Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.

Should you stir fudge while it's cooking? ›

Brush the sides of the pan with a wet brush at the beginning of cooking to dissolve sugar crystals stuck to the sides. Never stir the mixture during cooking or sugar could crystallize again.

What does cream of tartar do in fudge? ›

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

How do you make fudge creamy and not grainy? ›

Grainy Fudge

To avoid this issue, swirl the pan instead of stirring it with a spoon. You can use a wet pastry brush to wipe down any sugar that sticks to the sides of the pot.

What happens if you boil fudge too long? ›

Too cooked

The result is hard and brittle fudge. To save the fudge, put it in a saucepan with 45 to 60 ml (3 or 4 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil without stirring until the thermometer reaches 114 to 115 °C (237 to 239 °F).

How do you get fudge to soft ball stage? ›

Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.

Why won't my condensed milk fudge set? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

What is the best pan to make fudge in? ›

Secondly, the pot's material should allow for good heat distribution hence your top choice should be copper cookware or a pot with a copper core. Copper's exceptional heat conductivity offers unparalleled temperature control, an asset when working with finicky ingredients like sugar.

Why use evaporated milk in fudge? ›

Evaporated milk is milk that has been cooked to reduce its water content. It is more stable than regular milk and it can be cooked at high temperatures without curdling, a real benefit to fudge. Unfortunately, there is no substitute for it in a fudge recipe.

What to do with failed fudge? ›

Options for what you can do with your unset fudge:

OPTION 1) Depending on how runny it is, you can either use it as a frosting for cakes, or a sauce for ice-cream. OPTION 2) Freeze it overnight. Cut it into squares. Cover each square thickly in melted chocolate, ensuring no part of the fudge is exposed.

How to rescue fudge that won't set? ›

How can you fix soft fudge? Put it in a microwave safe bowl that is large enough that it won't boil over. Reheat it to the boiling point and cook for about 3 more minutes. Then you can beat some powdered sugar into it if this doesn't make it set.

What is the best temperature to cook fudge? ›

Add the butter, chocolate, salt, and vanilla and bring the temperature up to 235ºF. Remove from heat. Once the mixture has cooled to 110ºF, mix it with a wooden spoon until it loses the majority of its sheen. Pour the mixture into the prepared pan and let it cool fully before slicing.

How to make fudge more solid? ›

there is too much leftover water in the syrup and the resulting fudge is soft. To save the fudge, put it in a saucepan with 15 to 30 ml (1 or 2 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil until the thermometer reaches 114 to 115 °C (237 to 239 °F).

Why didn't my fudge set hard? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

How long do you boil fudge to get to soft ball stage? ›

How long does it take to make fudge:
  1. about 18 min to reach boiling.
  2. about 40 minutes to reach soft ball stage.
  3. 60 minutes to cool.
  4. 28 minutes to beat in a KitchenAid (your time for this may vary)
  5. 4 hours to set.

How long should you beat fudge? ›

Allow the fudge mixture to rest until the temperature registers between 150°-160°. Once the desired temperature is reached, beat the ever-loving stuffing out of the fudge. Two to three minutes of hardcore mixing (by hand).

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Prof. Nancy Dach

Last Updated:

Views: 6333

Rating: 4.7 / 5 (57 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Prof. Nancy Dach

Birthday: 1993-08-23

Address: 569 Waelchi Ports, South Blainebury, LA 11589

Phone: +9958996486049

Job: Sales Manager

Hobby: Web surfing, Scuba diving, Mountaineering, Writing, Sailing, Dance, Blacksmithing

Introduction: My name is Prof. Nancy Dach, I am a lively, joyous, courageous, lovely, tender, charming, open person who loves writing and wants to share my knowledge and understanding with you.