Salt Your Meat Ahead of Time (2024)

Learn why salting meat ahead of time makes for tastier food.

You’ve heard me say it before. But here it is again. Salt is magic. It’s tied for first for the most important ingredient in the kitchen (the other is fat if you were curious). Why so important? That was rhetorical, you all know why salt is important. You can’t properly cook without a lick of salt and a shot of tequila. 😉

When it comes to salting meat ahead of time, there are some salty dogs out there. Some say salting ahead of time dries it out. Others say that it makes it tastier. Who’s right? Let’s dive in.

If you’re interested, check out this past article on the types of salt out there and how they impact your cooking.

Does Salt Draw Moisture Out of Meat?

You can do this experiment yourself at home. Salt a piece of meat. And then wait. After a couple of minutes, you’ll notice water pools to the surface. Why? Osmosis—the process where water moves through cell walls to reach equilibrium. In this case, water moves from the less salty interior of the meat to the more salty exterior.

This moisture drawn to the surface is why lots of chefs say that you shouldn’t salt meat ahead of time. And it makes sense…on the surface. 🥁 (Get it? Because we are talking about water on the surface of the meat…Okay. Sorry. Moving on.)

Patting meat dry before searing is important. Those drawn-out juices make it a challenge to brown your meat. You’re initially steaming the surface until all the liquid evaporates. The surface has to reach above 212°F (100°C) for the flavor-creating reaction (aka browning) to take place.

But if you’re patient after salting your meat, you’ll see something magical happen. That moisture drawn to the surface disappears. I did say salt is magical! And it’s not evaporating—well at least not most of it. It’s reabsorbed by the meat.

So as moisture comes to the surface, salt dissolves into the water. But there’s more here. Salt travels into meat via diffusion. Diffusion is where salt moves from a saltier environment to a less salty one. It tries to reach equilibrium. So over time, that salty water on the surface travels back into the meat. The surface will dry out—which is great for browning—and the salt seasons the meat. But it does take time.

Time + Salt = Totally Worth It

The meat reabsorbs most of that moisture on the surface after about 40 minutes. But don’t stop there. The longer you wait, the more time the salt will have to travel through. Unless you’re getting hangry. 😠 Then I totally get not waiting.

Via diffusion, salt continues to travel through the meat, seasoning it throughout. So the longer it has, the more thorough the seasoning.

Temperature affects the speed by which diffusion happens. Salt will travel faster at a warmer temperature. So pull your chicken breast or prime rib out up to 2 hours ahead of time to sit at room temperature to speed up the process. (2 hours is how long the FDA says perishables can be left out before we get bacteria growth.)

How long should you wait? Well, the thicker and fatter the cut of meat, the earlier you should salt it. A thin pork chop needs less time than a thick one because there is less meat to travel through.

Tell me how much time already, Luciano! Alrighty, one day in advance is ideal for most cuts of meat. But you want at least 40 minutes. A large chicken or turkey will need about 2 days for the salt to work through the bird. Thin pork chops or steaks do great with a few hours.

⚠️ But be careful with meat salted too far in advance. It can start to cure and get a leathery texture if left for too long with salt. Prolonged salt soaks are how you make bacon and prosciutto after all. A good trick I learned from Samin Nosrat is to freeze a salted piece of meat if you’re not going to use it within 2-3 days. Simply defrost it when you’re ready to use it.

How much salt you ask? A good starting place is between 1–2 teaspoons of Diamond Crystal kosher salt per pound of meat. Though it depends on the type of salt you use. Two teaspoons of Diamond Crystal kosher salt is equal to about 1 teaspoon of table salt.

But the best way to know how much salt is right is to taste the meat once it’s done cooking. If it tastes delicious but not salty you nailed it. Commit to memory the amount you used, or even how salty the surface looked after you salted it. Remember time and temperature are also factors at play that impact proper seasoning. So figure out what works for you.

🐟 Quick call out. Do not salt fish and shellfish in advance. If salted too far ahead of time, they get a tough, chewy texture. According to Samin, you can salt a thick cut of fish up to 30 minutes in advance and flaky fillets for about 15 minutes. You should salt other types of seafood right at the time of cooking.

But It’s Not Just About Seasoning

  1. Salt makes meat juicer. How? Salt dissolves proteins and loosens muscle filaments as it travels into the meat. It becomes more gel-like. And this gel-like structure means the meat won’t push as many juices out as it contracts.
  2. Salt inhibits spoilage bacteria. I read this in Ruhlman’s Twenty. And it makes sense. It’s why we use salt as a curing technique. But it also means salting meat ahead of time makes it “fresher” and last longer in your fridge.

Takeaways

  • Salting meat ahead of time thoroughly flavors it and makes it juicier.
  • The longer salt has to do its magic, the better. Salt most things the day before. Salt bigger cuts and birds at least 2 days in advance.
  • 1.5 teaspoons of kosher salt per pound of meat is a good place to start.
  • If you don’t have time to let the meat sit for at least 40 minutes, wait to salt until right before cooking. Otherwise, you’ll lose some juices and make it more challenging to brown your meat.
  • Don’t salt more than 3 days in advance. It may start to dry out and get a leathery texture.
  • To be safe, don’t salt seafood ahead of time. Thick or flaky fillets of fish can handle 15–30 minutes in advance.
Where I learned this: Far and above Samin Nosrat’s Salt Fat Acid Heat inspired this article. But also The Science of Good Cooking and this article on cooking steaks by J. Kenji López-Alt.
Salt Your Meat Ahead of Time (2024)

FAQs

Salt Your Meat Ahead of Time? ›

The ideal time to salt your meat is 24 hours before cooking, though dry brining can start as close as two hours before placing your meat on the heat. Simply apply ½ to ¾ teaspoon of salt per pound of meat, spreading evenly over the entire surface. Place your meat in the fridge right after applying the salt.

Should you salt meat in advance? ›

Salting some meats (especially beef and pork) a few hours before cooking allows the salt to draw out some of the internal moisture, which is then reabsorbed into the meat WITH the salt, thus seasoning from the inside out. That's also basically the same science behind brining. In fact, it's called "dry brining."

How long should meat sit after salting? ›

When salting steak, it takes at least 40 minutes for all the meat juices to be expelled and then reabsorbed. Additionally, we don't recommend salting while you're grilling because the herbs and salt will just fall off and stick to your grill, leaving you with more cleanup later.

What happens when you salt meat overnight? ›

By salting your steak overnight, you allow the salt to fully penetrate the meat and work its way into the muscle fibers. This causes a breakdown of the proteins, which results in a more tender and juicy steak. The salt also enhances the natural flavor of the meat, making it taste more robust and savory.

Can I season meat the night before? ›

Ideally, a whole chicken would be seasoned a full 24 hours before it was roasted because salting so far ahead of time, I was told, gives the meat more flavor.

How long does salted raw meat last? ›

1 to 3 days: Salt and Refrigerate

Lightly sprinkle salt all over the cut of meat, and keep it uncovered on a rack in the fridge. The thicker the cut the longer you can keep it salted in the fridge.

How long will salt meat last? ›

Sliced cured and smoked meat products, which are ready to eat, can be kept under refrigerated conditions for 2–3 weeks; at higher ambient temperatures, however, spoilage is noticed within 3–5 days. Their keeping quality can be enhanced by a few days if they are subjected to further air drying or vacuum packaging.

Should you cover salted meat in the fridge? ›

As it does for poultry skin, a stint uncovered in the fridge dries the surface of beef, pork, and lamb roasts, allowing browning to happen faster and minimizing the risk of a gray band beneath the crust.

How far in advance should I salt chicken? ›

At least 1 hour and up to 24 hours ahead, sprinkle each chicken breast with ¾ teaspoon salt. Chill, uncovered, until ready to cook. In a small saucepan just big enough to hold the chicken with an inch of space at the top, combine chicken stock, coconut milk, lime juice, ginger and shallots.

Should I salt my chuck roast overnight? ›

Season the roast for at least 40 minutes and up to overnight before cooking. If you have the time, you should always strive to get your roast seasoned the night before roasting to let the flavor really sink in.

How far in advance can you season meat? ›

Some swear by salting immediately before or even while cooking. Others are fervent that a properly seasoned steak should be salted for 12 or even 48 hours ahead of time, depending on the thickness of the cut.

Is it OK to season steaks the night before? ›

While seasoning steak overnight can yield delicious results, there are a few things to keep in mind: Not All Cuts Are Equal: Thicker cuts of steak (like ribeye or New York strip) benefit more from overnight seasoning than thinner cuts. Thinner steaks can become too salty if left to season for too long.

Is it OK to season burgers the night before? ›

Before tossing them onto the grill, especially if you season the night before, Ramsay says to let the meat sit at room temperature for a little bit. "Let the meats relax a little bit, don't take them out of the fridge ice cold, otherwise they will be dry on the outside and raw in the middle," the chef explains.

Is it better to season meat before or after cooking? ›

We recommend seasoning your meat a bit before cooking to allow it to settle and absorb for a tastier outcome. You can also add some seasoning towards the end of the cooking to subtly enhance the taste. Take note that this is only to enhance the flavor and not the initial seasoning.

How far in advance should you salt prime rib? ›

Dry brine for 24-48 hours before roasting (24 hours is great, but 48 hours is better). Use 1 teaspoon Diamond Crysal kosher salt per pound or 2/3 teaspoon Morton kosher salt per pound (see the recipe below for directions).

Do you salt ground beef before or after? ›

When it comes to seasoning your ground beef, wait until after it has been browned and drained. Adding salt to raw ground beef pulls out moisture, drying the meat out and creating steam while it cooks, which prevents it from browning properly. The same goes for other seasonings, but for a different reason.

Top Articles
Latest Posts
Article information

Author: Pres. Carey Rath

Last Updated:

Views: 5817

Rating: 4 / 5 (61 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Pres. Carey Rath

Birthday: 1997-03-06

Address: 14955 Ledner Trail, East Rodrickfort, NE 85127-8369

Phone: +18682428114917

Job: National Technology Representative

Hobby: Sand art, Drama, Web surfing, Cycling, Brazilian jiu-jitsu, Leather crafting, Creative writing

Introduction: My name is Pres. Carey Rath, I am a faithful, funny, vast, joyous, lively, brave, glamorous person who loves writing and wants to share my knowledge and understanding with you.